The NBS 16″ Slick Side Billet 5.56 416R M-LOK Rifle Kit includes everything you need to turn your stripped lower into a functioning rifle. It has our 5-star rated NBS Slick Side Billet 416R Stainless M-LOK Complete Upper. Our customers have been blown away by the outstanding accuracy these of these uppers. It also includes an Omega Stock and Buffer Kit and Odin Works Mil-Spec Lower Parts kit.
Here is a bit about the complete upper included in the kit:
This upper uses a nitrided steel gas block from an American Manufacturer as opposed to aluminum, quality American Made handguards, and using a quality NBS M16 profile Black Nitride BCG paired with a 416R Stainless Steel Midlength barrel chambered in 5.56 with a 1:8 twist rate. The 1:8 twist provides the shooter the freedom to pick from a wider selection of bullet weights. From 55gr target rounds to 77gr match bullets, this barrel will stabilize them all.
This also means taking the time to ensure that the upper will function reliably. We use Permatex 242 on key components while using mil-spec AEROSHELL 33MS Anti-Seize grease on the properly torqued barrel nut and muzzle device.
Bottom line is this: you hear all the time about guys buying a budget upper and it not lasting or having to send it back because of some hardware defect or other issue caused by a careless assembly process. That is why we use quality components and assemble each unit to the highest standard of quality. We want your upper to function flawlessly out of the box. In fact, we guarantee it will.
Guaranteed Sub-MOA performance with match grade ammo and proper shooting technique
|Upper Receiver||NBS Slick Side Billet Upper
– 6061 Aluminum
– Pairs beautifully with any mil-spec lower
– M4 Feedramps
|Barrel||16″ 5.56 NATO 1:8 Twist Mid-Length 416R Stainless
– Guaranteed to hold a 1.000″ MOA at 100 yards with appropriate ammo and shooting techniques.
|Bolt Carrier Group||NBS Black Nitride M16 Bolt Carrier Group .223/5.56
– 9310 MPI Tested Bolt
– Case Hardened 8620 Carrier
– 4130 Gas Key
– Grade 8 Hardware With Proper Staking
– Gas Key Sealed With Permatex No.3
– 8740 Hard Chrome Firing Pin
– APOC Armory Nitrided Steel Gas Block
– Stainless Steel Mid-Length Gas Tube
|Handguard||NBS M-LOK Free Float Handguard
– American Made
– 6061 Aluminum
|Muzzle Device||Mil-Spec A2 Birdcage w/ Jet Black Nitride Finish|