Dirty Bird Bakersfield
Description
These are produced with the same chamber as our Spec. MK12 barrels with a slightly heavier profile. Built for reliability and accuracy. Best option for long range, high precision shooting. Available in both 14.5″ and 16.1″ lengths. If no barrel nut is chosen when ordering a pinned gas block, we will leave the taper pin slightly out for ease of removing to install your barrel nut. Taper pin must be re-installed in the same direction it arrived, and then set fully into place.
Features:
- Barrel Extension: M4 Feed Ramps
- Chamber: Optimized for use with MK262 (Black Hills 77gr equivalent)
- Twist: 1 in 7 right Hand
- Centurion Arms barrels serve as HBAR barrels
- Centurion Arms barrels require no further break in
- Requires gunsmith installation
Specifications:
- Color: Stainless
- Finish: Stainless
- Fabric/Material: 416R Stainless Steel
- Cartridge: 5.56mm
- Gas System Length: Mid Length
- Threads per Inch: 1/2×28
- Barrel Twist Rate: 1-7
- Barrel Material: 416R Stainless Steel
- Weight: 14.5in 2lb 3.7oz
- 16.1in 2lb 5.6oz
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Barrel Length | 14.5, 16" |
| Finish | Stainless |
| Barrel Profile | Heavy, M4 |
| Gas System Length | Midlength |
| Gas Block Journal | 0.75 |
| Cartridge Compatibility | 300 BLK, 5.56 NATO |
| Platform | AR-15 |
| Twist Rate | 1-7 |
| Muzzle Thread Pattern | 1/2×28, 5/8×24 |
| MPN | RB-16,RB-14.5-R5 |
| UPC | 6607,6610 |
Compliance
NFA (National Firearms Act) compliance is crucial for legal ownership and transfer of regulated firearms and accessories like short-barreled rifles, suppressors, and certain types of ammunition, ensuring adherence to federal regulations to avoid legal penalties and ensure responsible firearm ownership.
